Very Early Smoke Detection Apparatus

VFT-15 VFT-15 detector is a device sampling the air in multiple spaces at the same time. The system is able to detect from 0,001% to 20% of smoke per meter. Detector VFT-15 detects fire in its early stage both in sterile spaces and in the spaces filled with a large amount of smoke. The system might be extended into a multi-channel system which enables the division of the secured spaces into sectors in which samples are collected. As a result, the system is able to detect fire quickly and react in case of danger. Catalogue number: VFT-15

LaserSCANER LaserSCANER detector, supported by LaserPLUS technology, is supplemented by the mechanism and programming functions for controlling of the flow and amount of smoke in specific pipes. This particular type of detection work enables to extend the range of systems’ sensitivity from 0,005% to 20% of smoke detected in one meter of air. LaserSCANNER detector detects fire in the early stage both in sterile spaces and in the spaces filled with a large amount of smoke.

• Detector with LED diodes (FOK) and 7 relays Catalogue number: VLS-600

  Amount

• Detector with LED diodes (FOK) and 12 relays Catalogue number: VLS-700

  Amount

• Detector with a screen and 7 relays Catalogue number: VLS-204

  Amount

• Detector with a screen and 12 relays Catalogue number: VLS-304

  Amount

• Detector with a screen, time-clock and 7 relays Catalogue number: VLS-214

  Amount

• Detector with a screen, time-clock and 12 relays Catalogue number: VLS-314

  Amount

VESDA Seria P Seria P Detector is the main element of the very early smoke detection system. The distinguished characteristic of detection enables to spread the range of systems’ sensitivity from 0,005% to 20% of smoke detected in one meter of air. Seria P detector detects fire in its early stage both in sterile spaces and in the spaces filled with a large amount of smoke.

• Detector VESDA Seria P Catalogue number: VEP-A00-P

  Amount

LaserCOMPACT LaserCOMPACT detector was designed for the application of the very early smoke detection system in small secured spaces. This result was achieved by combining the reliable early smoke detection technology and a two-phase air filtering technology with a modified sampling pipe. All components are fitted into single, small casing with a screen.

• LaserCOMPACT VN Fitted with a set of relays and joint compatible with VESDAnet network Catalogue number: VLC-505VN

  Amount

VLC-EX VLC-EX detector was designed to apply the very early smoke detection system in small secured spaces where the risk of explosion is high (second explosion hazard zone). This result was achieved by combining the reliable early smoke detection technology and a two-phase air filtering technology with a modified sampling pipe. All components were fitted into a single, small, metal casing resistant to a high-pressure.

• VLC-500-EX Fitted only with a set of relays – not compatible with VESDAnet network Catalogue number: VLC-500-EX

  Amount

• VLC-505-EX Fitted with a set of relays and joint compatible with VESDAnet network Catalogue number: VLC-505-EX

  Amount

LaserFOCUS LaserFOCUS is designed for the application of the very early smoke detection system in small secured spaces. The operation of the detector is based on the continuous sampling of air which is transmitted to the detector by the system of pipes. The delivered air is filtrated and transmitted to the detection chamber. Next, the air is scanned by diffused light for the presence of smoke. The result of the analysis is displayed on the detector’s monitor. The relays are activated once the amount of smoke in the air exceeds the set norm.

• LaserFOCUS 250 Max. coverage area - 250m ² . Catalogue number: VLF-250

  Amount

• LaserFOCUS 500 Max. coverage area - 500m ² . Catalogue number: VLF-500

  Amount

ABS pipe The pipe is made of ABS material, available in 3 m long pieces, 20 pieces in the pack. The overall length of the set – 60mb
ABS pipes are used in harsh conditions – e.g. temperature below -10°C or above 50°C. In such environment the pipe may be deformed. Catalogue number: PIP-001-ABS

Capillary tube Flexible red capillary tube 10 mm in diameter, available in 100 m pieces. Catalogue number: 221-035

Muff Muff made of ABS material is designed for connecting PVC and ABS pipes 25 mm in diameter each. Catalogue number: PIP-002

Detachable muff Detachable muff made of ABS material is designed for connecting PVC and ABS pipes 25 mm in diameter each. This type of muff enables simple dismantling of pipes. The recommended use of the muff is to provide the link between the pipes and the detector. Catalogue number: PIP-003

Elbow 90° Elbow fitting curved by 90° made of ABS material is designed for connecting PVC and ABS pipes 25 mm in diameter. Catalogue number: PIP-005

Elbow 45° Elbow fitting curved by 45° made of ABS material is designed for connecting PVC and ABS pipes 25 mm in diameter. Catalogue number: PIP-006

Socket coupling Socket coupling made of ABS material is designed to be assembled at the end of PVC and ABS pipes 25 mm in diameter. Catalogue number: PIP-007

Tee Tee made of ABS material is designed for constructing ramifications of PVC and ABS pipes. Tee is 25 mm in diameter. Catalogue number: PIP-008

Capillary tube adapter Capillary tube adapter is designed for connecting capillary tubes 10 mm in diameter with PVC and ABS pipes 25 mm in diameter. Catalogue number: PIP-016

Tapered capillary set Capillary set has a tempered sampling tip installed at its end. The set includes capillary tube adapter, capillary tube 2 m long and 10 mm in diameter and tempered sampling tip. Catalogue number: 059-007

Flat capillary set Capillary set has a flat sampling tip installed at its end. The set includes capillary tube adapter, capillary tube 2 m long and 10 mm in diameter and a flat sampling tip. Catalogue number: 059-001

Tapered sampling tip Tapered sampling tip is placed at the end of the capillary tube which diameter is 10 mm. Catalogue number: 144-013

Flat sampling tip Flat sampling tip is placed at the end of the capillary tube which diameter is 10 mm. Catalogue number: PIP-015

Universal end-cap for capillary tube Universal end-cap for a capillary tube (sold without the tube) is used for closing flexible capillary tubes which diameter is 10 mm. Catalogue number: 222-059

Tube handle Tube handle for PVC and ABS pipes 25mm in diameter each. Installed with use of screw anchors (sold without screw anchors). Catalogue number: PIP-009

Cable tie Cable tie sold in sets – 100 pieces in each set Catalogue number: PIP-013

Pipe sticker Sticker with "VESDA Smoke Detector System Pipe" inscription used for labeling sampling pipes integrated with VESDA device. Sold in a set – 100 pieces in each set. Catalogue number: 128-015

Sampling hole sticker A round sticker used for indicating a sampling hole with additional inscription “VESDA Fire Detection System do not paint”. Sold in a set – 200 pieces in each set. Catalogue number: 128-046

VESDAnet Network Interface Card VESDAnet NIC is compatible with LaserFocus devices. Catalogue number: VCI-010

Relay Card Relay Card is compatible with LaserFocus devices. Catalogue number: VCI-020

VESDAnet remote network socket VESDAnet remote network socket facilitates long-distance operation of VESDA® by Xtralis devices. Remote network socket VESDAnet can be purchased along with a rough-in box. Catalogue number: VRT-300

Remote programmer Remote programmer is a unit allowing its user to operate the detector by obtaining access to its menu. Also, the unit enables configuration and maintenance of the system very early smoke detection and configuration of the detector. Remote programmer can be purchased along with the rough-in box. Catalogue number: VRT-100

Remote relays Remote relays can be purchased along with the rough-in box.

• Remote relay unit for LaserSCANNER detector with 7 relays Catalogue number: VRT-E00

  Amount

• Remote relay unit for LaserPlus detector with 7 relays Catalogue number: VRT-500

  Amount

• Remote relay unit for LaserPlus detector with 12 relays Catalogue number: VRT-900

  Amount

• Remote relay unit with 7 relays Catalogue number: VRT-S07

  Amount

• Analogue remote relay unit Catalogue number: VRT-A10

  Amount

Remote display unit Display unit transmits information on detector’s status – precisely recognizes alarms and damages. Remote display unit can be purchased along with the rough-in box.

• Remote display unity for LaserSCANNER detector, without relays Catalogue number: VRT-700

  Amount

• Remote display unity for LaserSCANNER detector, with 7 relays Catalogue number: VRT-400

  Amount

• Remote display unity for LaserSCANNER detector, with 12 relays Catalogue number: VRT-800

  Amount

• Remote display unity for LaserPLUS detector, without relays Catalogue number: VRT-600

  Amount

• Remote display unity for LaserSCANNER detector, with 7 relays Catalogue number: VRT-200

  Amount

• Remote display unity for LaserCOMPACT detector, without relays Catalogue number: VRT-K00

  Amount

• Remote display unity for LaserSCANNER detector, with 7 relays Catalogue number: VRT-J00

  Amount

• Remote display unity for LaserFOCUS detector, with 7 relays Catalogue number: VRT-V00

  Amount

Casing of a remote unit – without electronics and end-cap Casing of a remote unit is compatible with: VESDAnet remote network socket, remote programmer, remote relays or remote display unit. Catalogue number: VRT-000

Plug with "VESDA® by Xtralis" logo Plug with "VESDA® by Xtralis" logo is used to encase the remote unit, LaserSCANER detector and LaserPLUS detector. Catalogue number: VSP-000

Plug without logo Plug with a logo is used to encase the remote unit, LaserSCANER detector and LaserPLUS detector. Catalogue number: VSP-200

PC-Interface-HLI with wires Catalogue number: VHX-0200

Pipe Shears Catalogue Number: PIP-014

Air filter cartridge Air filter is compatible with LaserPLUS, LaserSCANER, LaserCOMPACT, LaserFOCUS Catalogue number: VSP-005

Air filter Coarse air filter for VFT-15 detector (offered in 10-pieces sets) Catalogue number: 02-FL53

Air filter Sensitive air filter compatible with VFT-15 detector (offered in 10-pieces sets) Catalogue number: 02-FL56

Uninterruptible power supply 24V Power supply supporting fire suppressing systems

• ZSP135-3.2A-1 Maximum output current 3.2A (reserve for battery loading not included).
  Rated output current 1,2A.
  Requires two 18Ah batteries for operation. Catalogue number: ZSP135-3.2A-1

  Amount szt.

• ZSP135-3.2A-2 Maximum output current 3.2A (reserve for battery loading not included).
  Rated output current 1,2A.
  Requires two 24Ah batteries for operation. Catalogue number: ZSP135-3.2A-2

  Amount szt.

• ZSP135-4.5A-1 Maximum output current 4.5A (reserve for battery loading not included).
  Rated output current 2,5A.
  Requires two 18Ah batteries for operation. Catalogue number: ZSP135-4.5A-1

  Amount szt.

• ZSP135-4.5A-2 Maximum output current 4.5A (reserve for battery loading not included).
  Rated output current 2,5A.
  Requires two 24Ah batteries for operation. Catalogue number: ZSP135-4.5A-2

  Amount szt.

• ZSP135-6.5A-1 Maximum output current 6.5A (reserve for battery loading not included).
  Rated output current 4,5A.
  Requires two 18Ah batteries for operation. Catalogue number: ZSP135-6.5A-1

  Amount szt.

• ZSP135-6.5A-2 Maximum output current 6.5A (reserve for battery loading not included).
  Rated output current 4,5A.
  Requires two 24Ah batteries for operation. Catalogue number: ZSP135-6.5A-2

  Amount szt.

Batteries

• Maximum battery capacity 18Ah Catalogue number: MWL 18-12

  Amount szt.

• Maximum battery capacity 24Ah Catalogue number: MWL 24-12

  Amount szt.

AGC Master Extinguishing Apparatus AGC Master® Extinguishing Apparatus is designed for automatic smoke detection and fire suppression in IT, telecommunication and other rack cabinets fitted with electronic and electric devices. The apparatus is shaped in the form of a 19-inch, 3U high panel designed to be fitted in the top rack of the cabinet. The device is applied in the cabinets with cubic space up to 3m³. Catalogue number: APA-GAS-M

AGC Slave® Extinguishing Apparatus AGC Slave® Extinguishing Apparatus is designed for 19-inch rack cabinets which joint cubic space exceeds 3m³. AGC Master Extinguishing Apparatus is required for the proper functioning of the system. Catalogue number: APA-GAS-S